Skip to main content

Why Is My Package Showing “Sold Out” or “Join the waitlist”?

Package Visibility Issue

Quick checks first

If your trip or package shows Sold Out, Booking closed or Join the waitlist on your public page but you know it shouldn't, read the exact words on the page first: they tell you which setting is doing it. Then run through these quick checks; most fixes take a few seconds:

  1. Refresh the page (or open it in a private/incognito window) to rule out a cached view.

  2. Read the button. Booking closed is not Sold Out: it means the trip's Bookings close on date has arrived (with no date set, bookings close the day the trip starts, from the start of that day). Pick a later date under Bookings close on in the Bookings section of Preview and Publish, or click Close on the start date. Once the trip has started, bookings cannot be reopened. While the trip is still ahead, your trip dashboard also shows Booking closed with a Reopen bookings link to that section. If the page says Join the waitlist, Accept a waitlist when sold out is on in the same section and the trip is sold out, its Bookings close on date has arrived, or your payment account can't take payments right now.

  3. Check the sold-out switches: Stop taking bookings in the Bookings section of Preview and Publish (whole trip) and Mark as sold out on the package itself force Sold Out. A room marked sold out only closes that room, and the package shows Sold Out once no room priced in it has any left.

  4. Check your inventory/quantity — if every room or spot is booked (or quantity is set to 0), it reads as Sold Out.

  5. Reload the public page after any change: Trip Basics, package and room changes go live as soon as they are saved, even while the trip is published.

Still stuck? The full breakdown below covers the setup causes. One more to rule out: an option marked This option is sold out in a room with Count per option ticked. If more than one of these applies, fix each one; clearing only one leaves the page showing the next.

Overview

If your travel package is displaying “SOLD OUT” or “Join the waitlist” (on a package priced by room, “This package is sold out.” or a form with a Join the waitlist button; the waitlist only appears when Accept a waitlist when sold out is switched on in the Bookings section of the Preview and Publish step), it’s usually caused by one of several setup issues:

  • The Mark as Sold Out toggle is enabled (either on the package or on a specific room).

  • The rooms were not set up correctly.

  • The package is priced By room but no room has a price in it.

  • The organizer hasn’t added any rooms, or the rooms have no price in any package.
    ​

This article explains how to identify and resolve each scenario. If your trip was created on an older version of SquadTrip, some screens may look different.


Common Causes and Fixes

1. Stop Taking Bookings Turned On for the Whole Trip

If Stop taking bookings is on (in the Bookings section of Preview and Publish; this is the trip-level switch), the whole trip is sold out and the Book Now button disappears for every package.

How to Check & Fix:

  • Open the trip and choose Trip Actions → Edit Trip Settings.

  • Open the Preview and Publish step and find the Bookings section.

  • If Stop taking bookings is on, switch it off. It saves as soon as you click it.

  • Refresh the public package page — the Book Now button should reappear.
    ​


2. Mark as Sold Out Enabled for a Room or Package

If your package includes several rooms, one or more of them may be marked as sold out, even if the entire package is still intended to be available.

This can happen in two places:

  1. At the package level - the main package has been marked as Sold Out.

  2. At the room level - an individual room in the package has been marked as sold out or closed to new bookings.

A package-level toggle shows SOLD OUT (or Join the waitlist) straight away; a room’s setting only closes that room, so the package stays bookable while another room priced in it still has availability.

A. How to Check & Fix for Packages:

  • Open the trip, choose Trip Actions → Edit Trip Settings and go to Packages. Click the 3-dot symbol and then Edit. On a trip that sells rooms only there is no Packages step: use Mark as sold out under About what you're selling on the Rooms step instead.

    Trip Packages list with the three-dot menu open on a package showing Edit, Duplicate and Delete

  • Scroll down to the Promotion section, locate the “Mark as Sold Out” toggle.

    Package form showing the Package name and the Promotion block with Enable promo tag and Mark as sold out switched on

  • If it’s on, switch it off.

  • Click Save Changes.

  • Revisit your booking page; the package should be bookable again.

B. How to Check & Fix for Rooms:

  • Open the trip, choose Trip Actions → Edit Trip Settings, go to Rooms, find the room you sell in your package and click Edit. A room marked sold out shows a Sold out pill next to its name, and a closed one shows closed.

    Rooms step of a trip with packages listing the Garden Room, Beach Suite and Guesthouse with their ways to sell, booked counts and Edit buttons

  • Scroll down and open Availability and status, and see whether Stop new bookings or Show as sold out is ticked.

    Room editor for the Garden Room with Availability and status open and its three choices: Stop new bookings, Show as sold out and Hide once sold out

  • If either is ticked, untick it.

  • Click Save changes.

  • Revisit your booking page; that room should be bookable again alongside the others.


3. Missing or Unassigned Rooms

If the package is priced By room but no room has a price in it, it will appear sold out or show the Join the waitlist button.

How to Check & Fix:

  • Open the trip, choose Trip Actions → Edit Trip Settings and go to Rooms.

  • Select the room you want to sell in the package (e.g., “Garden Room”).

  • Click Edit.

    Rooms step of a trip with packages with the Garden Room’s Edit button and the Packages & pricing card with Open grid
  • Under How it sells, each way to sell the room has a Price per person box for each package priced by room. At least one way needs a price in your package’s box: Blank = not sold in that package.

    • If your package’s box is empty, type the price per person. On a trip with packages, you can also click Open grid on the Rooms step and use + Add price in your package’s column.

  • Fill out all required details.

    Room editor for the Garden Room with Way 1, 2 people per room, a Standard price of $875 and an empty Premium price box, and the Save changes button
  • Click Save changes.

  • Refresh the public page, the Book Now button should now display properly.


Quick Reference Table

Cause

Where to Check

How to Fix

“Stop taking bookings” for the whole trip

Trip Actions → Edit Trip Settings → Preview and Publish → Bookings

Switch it OFF (saves right away)

“Bookings close on” date has arrived (page says Booking closed)

Trip Actions → Edit Trip Settings → Preview and Publish → Bookings

Pick a later date, or click Close on the start date (saves right away)

“Show as sold out” at room level

Trip Actions → Edit Trip Settings → Rooms → Edit → Availability and status

Turn toggle OFF and Save

No room priced in the package

Trip Actions → Edit Trip Settings → Rooms → Edit → Price per person

Type a price in the package’s box and Save changes


Verification Checklist

After applying the fixes:

  • The “Book Now” button appears on the booking page.

  • The package no longer shows “Sold Out”, “Booking closed” or “Join the waitlist.”

  • All rooms are displayed with the correct availability and pricing.


Additional Notes

  • If multiple admins or trip organizers have access, ensure no one re-enables “Mark as Sold Out” by mistake.

  • Trip Basics, package and room changes go live as soon as they are saved, even while the trip is published.

If issues persist, double-check that your rooms match how the package is priced: a package priced By room needs at least one room with a price in it.

Did this answer your question?